In the pictures you will see a couple things, first off, I am using the wrong side knuckle, in short sightedness I started working on the drivers side suspension, but I only had the passenger side knuckle completed, secondly there is a small issue with the mounting plate for the lower ball joint, I need to bend and re-enforce the plate so the ball joint bolts and steering knuckle do not bind at full extension (fortunately the shock/spring combo needs to bolt in the same location so the re-enforcing plate will also mount the shock), second I haven't completed the rear part of the lower control arm, this was just a test fit I should have it completed in a day or two, also I am missing the upper control arm radius rods, they are on order and will be coming in within a week or two. Lastly the shock/spring combo is touching the stock cradle near the cross shaft, fortunately this is part of the stock spring location and can be trimmed back to give better clearance
